color laser toner printer toner powder
printer toner powder Supplier Describes how to deal with printer problems
Involve multiple sheets at a time
Fault reason: If the printing paper storage time is too long, there will be moisture on the surface, this moisture may make multiple sheets of paper glued together, likely to cause the printer to roll multiple sheets of paper failure occurs. Electrostatic induction on the surface of the paper, the thickness of the paper can easily lead to multiple sheets of paper are also involved.
Solution: For long-term placement of paper can be simple heat to remove moisture. If you want to rule out the phenomenon of static electricity on the surface of the paper, paper can be placed in the paper feed slot before the spread of the paper scattered to ensure that the paper does not stick together. In addition, the paper used for printing must weigh more than 60 grams. If using less than 60 grams of ultra-thin paper, the printer can easily get caught in multiple sheets of paper at a time.
Failed to feed the paper
Reason for the failure: This situation may be caused by obstacles inside the printer may also be caused by high paper height in the feed slot or paper thickness is inappropriate, to solve the problem one by one to eliminate the cause of the malfunction.
Solution: First, open the printer's case to see if there are any obstacles inside. If there is a paper jam or paper jam, the printer's feeding system will of course not work. Remove the obstruction, the printer can work properly. Second, check that the paper in the paper feed slot exceeds the height limit on the rails on both sides of the paper feed slot. If the paper height exceeds this level, it may hinder the normal paper feed of the paper feed system. Place the right amount of paper in the paper feed slot correctly. Again, see if the paper used by the printer is a standard, specialty paper that can not feed if it is too thick or too thin.
Looking forward to your inquiry for this color laser toner printer toner powder