xerox toner mikasa toner
How to add printer toner
The printer toner has good printing effect, uniform texture, and high cost performance. It can customize the processing color and has a good protection effect on the toner cartridge.
As the name suggests, the printer toner is the most critical material in the printer. Without the printer toner, the printer cannot work normally. The printer toner needs to clean the excess toner during the addition process, and then add the new one again. The specific steps are as follows:
Clean up excess toner: Clean up the excess toner in the toner cartridge and clean the toner on the magnetic stick. This is an important point. The method of operation is very simple. First, unscrew the screw under the magnetic stick. Take off the three sheets. Be sure to pay attention to the front and back of the sheet, and then remove the magnetic stick. Use a vacuum cleaner to clean the sponge stick under the magnetic stick. The powder in the powder bin should also be cleaned. Add printer toner: After the above steps are all done, you can add toner to the toner cartridge. Place the toner cartridge cover open, put the toner into the cartridge, and close the cartridge cover. This will add toner successfully.
Looking forward to your inquiry for this xerox toner mikasa toner